IV-SW12V/1A

IV-SW12V series regulated switching power supply ensures you the camera always get stable voltage and the voltage stays at settled 12.5V all the time no matter of the load. If the load goes over the rated amps, the power supply switces off, protecting the cameras from spikes and voltage fluctuations.

OUTPUT RATED & ELECTRICAL SPECIFICATIONS

         Rated output voltage ----------12V

Rated output current -----------1000mA

Max. output voltage -------------12.7V dc (no load)

Min. output voltage---------------11.5V dc (Io=2000mA)

Ripple & Noise---------------------150mVp-p Max

        Over load protection-------------YES

        Short circuit protection-------------YES

Rated output power--------------24W

Line regulation--------------+/-3%

Load regulation--------------+/-2%

Switch frequency------------------110KHz Max.

Insulation class---------------------II

Consumes---------------------------<1.5W

* Ripple & Noise Test: Add 0.1uF/50V ceramic capacitor with a 47uF/50V E.capacitor in parallel  across the output terminal.  And  Measured with 20MHz Bandwidth Oscilloscope.